Thrust Ball Bearing
Thrust ball bearing is composed of two washers, which may be either flat or grooved (with raceways), and the rolling ball elements are typically caged.
-Bearing Number : 51101-
Thrust ball bearings are composed of washer-like bearing rings with raceway grooves for the balls. The ring attached to the shaft is called the inner ring or tight washer and the ring attached to the housing is called the outer ring or loose washer.
In double direction thrust ball bearings, there are three rings, with the center ring fixed to the shaft. Single direction thrust ball bearings can support axial loads in one direction only; double direction, in two. Both are available with an aligning seat and washer beneath the outer ring to compensate for shaft misalignment or deflection.
-Bearing Number : 51101-
In double direction thrust ball bearings, there are three rings, with the center ring fixed to the shaft. Single direction thrust ball bearings can support axial loads in one direction only; double direction, in two. Both are available with an aligning seat and washer beneath the outer ring to compensate for shaft misalignment or deflection.
Thrust Ball Bearing
Thrust Ball
Auto Thrust Ball
Auto Thrust Needle
Products Category
上一篇
下一篇
Taiwan Head Office
JOTA BEARING CO.,LTD.
NO.65,Ln.1434, ChunRi RD.,33051 Taoyuan, Taiwan, R.O.C
TEL : +886-3-325-0202
FAX : +886-3-325-9933
E-mail : iskbearing@jota-bearing.com.tw